[Equest-users] G3.1.2.10 Heat Recovery

[Carol Gardner]

Hi Omer,

You need to consult with the design engineer that is specifying the heat
recovery system for your building. If you tell him/her the information you
need to input into eQUEST to model heat recovery, he/she should be able to
provide you with the proper values.

Cheers,

Carol

2010/12/17 <omoltay at mimtarch.com>

> Dear All,
>
> I need to model heat recovery in one of my fan systems for the baseline
> case according to G3.1.2.10. As far as I understand there are only 2
> requirements dictated by ASHRAE:
>
> - At least 50% recovery effectiveness,
> - Permitting air economizer operation by bypassing heat recovery.
>
> Since there are so many options in Equest Heat Recovery tabs, I am at a
> loss to where to start. Has anybody had experience with modelling ERV to
> satisfy ASHRAE 90.1?
>
> Best regards,
>
> Ömer Moltay
> Mimta Ltd.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>



-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101217/74c77037/attachment-0002.htm>