[Equest-users] eQuest Crashing when fan control changed

[Carol Gardner]

Hi Fred,

Grrr, don't you hate stuff like this? Did you check your .bdl file to see if
it yielded any clues? I'd do a search on "error" and if there were no hits
look at the very end of the file for comments.

Good luck,

Carol

On Tue, Dec 28, 2010 at 11:11 AM, Fred Betz <fbetz at aeieng.com> wrote:

> All,
>
>
>
> When I change the fan control in a VAV system from Inlet to Fan EIR FPLR
> and apply a curve, eQuest locks up and I have to close the program.
>
>
>
> This only happens in one of the VAV systems I have, the other 4 work fine.
>
>
>
> Also, I can change from Inlet to Variable Speed without any problem.
>
>
>
> Any thoughts on what could be causing this?
>
>
>
> Fred
>
>
>
> *Fred Betz**  *PhD., LEED AP
> Sustainable Systems Analyst
>
>
>
> *AEI* | AFFILIATED ENGINEERS, INC.
> 5802 Research Park Blvd. | Madison, WI  53719
>
> P: 608.236.1175 | F: 608.238.2614
> fbetz at aeieng.com  |  *www.aeieng.com*
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101228/e35fbefb/attachment-0002.htm>