[Equest-users] Properly modeling PTAC and Baseboard system

[Alex Krickx]

Bill- I did do that, thanks for checking.

Paul- The building engineer hasn't said there was any separate ventilation system so I assumed that the through wall AC would take care of the ventilation.  Does the eQUEST PTAC system not include ventilation?

Thanks for your help!

Regards,
Alex Krickx

From: Paul Riemer [mailto:Paul.Riemer at dunhameng.com]
Sent: Friday, January 22, 2010 12:28 PM
To: 'Bishop, Bill'; Alex Krickx; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Properly modeling PTAC and Baseboard system

Alex,
You have not said if or how you are ventilating these spaces.
Paul

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Bishop, Bill
Sent: Friday, January 22, 2010 2:25 PM
To: Alex Krickx; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Properly modeling PTAC and Baseboard system

Alex,
Sounds good so far. Make sure you select "System per Zone" for the PTAC system.
Regards,
Bill

William Bishop, EIT, LEED(r) AP | Pathfinder Engineers & Architects LLP
Mechanical Engineer

134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.
________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alex Krickx
Sent: Friday, January 22, 2010 2:57 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Properly modeling PTAC and Baseboard system

Hi everyone,

I have a (hopefully simple) question on how to model a senior living center HVAC system.  Central natural gas boiler provide heating which is delivered through baseboards and cooling is provided by through-wall AC units (one per each apartment).

I've modeled the system as Cooling: DX coils; Heating: None; System Type: PTAC (no heating).  I'm currently in the DD Wizard so on Wizard Screen 6 I've selected Baseboard source as Hot Water Loop.

I'm hoping that someone can confirm this is the correct way to model this system.

Thanks very much.

Regards,
Alex Krickx


Alex Krickx
Building Energy Specialist
[cid:image001.jpg at 01CA9B60.F91D4090]
1250 Elko Dr, Sunnyvale, CA 94089
(t) 408.541.8124

Warning: The information contained in this e-mail may be privileged attorney-client communications or attorney work product and/or proprietary and confidential.  If the reader of this message is not the intended recipient then you have received it in error and any review, distribution or copying of this message is prohibited and you are to notify us immediately by reply e-mail and delete the original message immediately.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100122/3abd4a5c/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5602 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100122/3abd4a5c/attachment-0002.jpg>