[Equest-users] Help - Fuel Meters

[Rob Hudson]

At the equipment level, you need to change the meter to reflect FM2,
otherwise FM1 will record all information on energy usage for that piece of
equipment.  This is similar if you want to meter HVAC systems, zones or
water systems separately.

On Thu, Jun 17, 2010 at 10:11 AM, Synergy Team
<synergydesignteam at gmail.com>wrote:

> We are developing an eQUEST model for a 10-story brick residential tower.
> The boilers which provide space heat/DHW burn Fuel Oil #2 which we have
> managed to link to a meter (FM1) and the reports reflect this. However, we
> have added a new fuel meter (FM2) which needs to be associated with the
> natural gas consumption of the stoves/ranges and clothes dryers in the
> facility. When we run the reports, they do not reflect any natural gas
> consumption. There are zeros across the board for FM2 - Natural Gas in the
> BEPU and BEPS reports. Does anyone know how to link the newly created meter
> (FM2) to reflect the N.G. used by these appliances?
>
> Regards,
>
> Vaughn Slovak
> Architectural Designer
> Synergy Design
> p.845.255.1733
> f.845.255.1694
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100617/f047d44f/attachment-0001.htm>