[Equest-users] Undergound floor

Chris Jones cj at enersave.ca
Mon Jun 21 13:34:27 PDT 2010


Thanks for your reply.  I can't find a way to "copy" a polygon?  I am 
in Detailed Edit Mode.

At 01:18 PM 6/21/2010, Demba Ndiaye wrote:
>Chris,
>
>When you input "Bottom" as the location, eQuest uses the default 
>polygon corresponding to the space floor.
>Copy this one, and customize it. Then input it as the new polygon for the UG.
>
>Demba.
>
>-----Original Message-----
>From: equest-users-bounces at lists.onebuilding.org 
>[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Chris Jones
>Sent: Monday, June 21, 2010 12:56 PM
>To: equest-users at lists.onebuilding.org
>Subject: [Equest-users] Undergound floor
>
>Is there a way to insert an underground floor that is not the size of
>the entire floor of the space.  I would like to insert a ug floor
>that is a 3' strip along the perimeter of the space.  When I insert
>Child Component, Underground Floor, equest makes it the size/shape of
>the entire space.  The UG floor dialog allows me to change the area
>but then I get a Bad Building Component error.
>
>
>
>
>Chris Jones
>14 Oneida Avenue
>Toronto, ON M5J 2E3.
>Tel.  416-203-7465
>Fax. 416-946-1005
>
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


Chris Jones
14 Oneida Avenue
Toronto, ON M5J 2E3.
Tel.  416-203-7465
Fax. 416-946-1005





More information about the Equest-users mailing list