[Equest-users] Exhaust rates in wizard mode

Matthew Higgins Higgins at edi-arch.com
Fri Mar 12 13:04:12 PST 2010


In the zone group definitions screen, click the zone details box and you'll be able to specify the cfm and other small details. Then in the DI, you can balance the infiltration or not.

Matthew Higgins, LEED-AP, ASHRAE-HBDP
Associate Building Performance Specialist

Environmental Dynamics, Inc.
Architecture and Sustainability Consulting Services
505.242.2851 x.103
web. edi-arch.com

Any data provided by the Consultant, verbal or written, are to be considered opinions of building energy and/or daylight performance. The Client understands that the Consultant has no control of occupant habits, equipment or material performance or characteristics, site or climate conditions or the Contractor's method of assembly, and that the Consultant's opinions regarding building energy/daylight performance are made on the basis of the Consultant's professional judgment and experience. The Consultant makes no warranty, express or implied, that the energy/daylight performance of the building will not vary from the Consultant's opinion of building energy/daylight performance.


>>> "Nick Caton" <ncaton at smithboucher.com> 3/12/2010 1:48 PM >>>

Hi all,
 
I may be missing something blatant, but is there any means of specifying exhaust for zones/systems in the wizards?
 
As best I can tell, there’s no way around specifying items in detailed mode to ensure exhausted air is accounted for during a 90.1 baseline “sizing run” (to determine capacities/SA-CFM’s for efficiency/RA-CFM/fan power inputs).
 
Just trying to tighten my workflow to avoid unnecessary rework… has anyone been in the practice of cleverly cramming the exhaust into the model via wizards or would this be a futile use of our time?
 
~Nick
 

 
NICK CATON, E.I.T.
PROJECT ENGINEER
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
Check out our new web-site @ www.smithboucher.com 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100312/c64776f1/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100312/c64776f1/attachment-0001.jpeg>


More information about the Equest-users mailing list