[Equest-users] rule of thumb

[Eric Johnson]

All,

 

Is there a rule of thumb for using modeled site energy to indicate -
calculate LEED points?  For example 52 kBtu/ft2 equals 6 points

 

Thanks for any thoughts.

 

Kind Regards,

 

_______________________________________

 

Eric Johnson | LEED Accredited Professional

Executive Cost Manager

for Gardiner & Theobald s.r.o.

 

Prague Office: Krakovska 583/9, 110 00 Praha 1

Tel:           +420 224 946 956

Fax:          +420 224 947 689

Mobile:     +420 724 173 187

E-Mail:      <mailto:e.johnson at gardiner.cz> e.johnson at gardiner.cz

Web:         <http://www.gardiner.com/> http://www.gardiner.com/

 

PRIVACY AND CONFIDENTIALITY NOTICE
This message, and any files transmitted with it, is intended only for the
use of the intended recipient or organisation to whom it is addressed. It
may contain information that is privileged and confidential. If you are not
the intended recipient, no action may be taken on the information nor should
it be copied or shown to a third party. Any views expressed in this
communication may not necessarily be the views held by Gardiner & Theobald. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100318/2ed80edb/attachment-0001.htm>