[Equest-users] LEED Commercial Interiors

[Grando, John]

Was your design case a chilled water system?  LEED CI says to use Section 11 (ECB Method) rather than Appendix G


John Grando LEED AP| Mechanical Engineer





________________________________
From: Nikola Kravik [mailto:nkravik at rumseyengineers.com]
Sent: Tuesday, March 30, 2010 2:31 PM
To: 'Syed Mohsin Abidi'; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] LEED Commercial Interiors

Do one floor only, not the entire building.
Watch out for the baseline system type choice.
Although is may seem strange, but your baseline should be CHW System, not Packaged or whatever the requirement is for one story bld.
At least this is the approach I was told to use here in San Francisco, CA when I first modeled 6th floor (1 story LEED CI) out of 30+ high rise.......It wasn't Equest as simulation tool, but that shouldn't matter.

Others, can you add your experience with LEED CI?

Thanks,
Nikola

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Syed Mohsin Abidi
Sent: Monday, March 29, 2010 6:56 AM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] LEED Commercial Interiors

Need help regarding LEED 2009 CI project.
Our project scope is just a single office floor in a 35 story high rise building in new York city. Now for simulation using EQUEST do we need to perform simulation for the entire building or just that one floor that is related to our scope of work in order to gain credits for Energy Atmosphere.

Please guide.

Thank you,

Syed Mohsin Abidi, EIT, LEED AP
TSF Engineering, P.C.
Consulting MEP Engineers
200 Park Avenue South
New York, New York 10003
Tel. 212.253.7303
Fax.212.253.6512
Sabidi at tsfengineers.com<mailto:Sabidi at tsfengineers.com>

P Please consider the environment before printing this e-mail




NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100330/ffe0fdf8/attachment-0001.htm>