[Equest-users] Infiltration heating load from window type

[Brian Fountain]

I would look at the time of occurrence of the peak loads -- and the 
corresponding values in the infiltration schedules eQUEST creates.  I 
suspect the time of the peak is changing which is setting a different 
infiltration rate.

Bishop, Bill wrote:
>
> The infiltration heating load (shown on the LS-C report) is reduced 
> roughly in half when I perform a parametric run that only replaces the 
> window type with one with poorer U-value and higher SHGC. The 
> infiltration cooling load is unchanged.
>
>  
>
> Any ideas why?
>
>  
>
> Thanks,
>
> Bill
>
>  
>
> *William Bishop, EIT, BEMP, LEED^® AP **|** **Pathfinder Engineers & 
> Architects LLP***
>
> Mechanical Engineer
>
>  
>
> 134 South Fitzhugh Street
> Rochester, NY 14608
> T: (585) 325-6004 Ext. 114
> F: (585) 325-6005
>
> wbishop at pathfinder-ea.com
>
> www.pathfinder-ea.com
>
> P Please strive to live sustainably.
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.733 / Virus Database: 271.1.1/2751 - Release Date: 03/16/10 15:33:00
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100316/769bc97c/attachment-0002.htm>