[Equest-users] Schedules

[Keith Swartz]

Michael,

The process you described is the only method available in the wizards. More complex adjustments have to be made in the Detailed Interface.

________________________________
Keith Swartz, P.E., LEED AP

Energy Engineer / Senior Project Manager
Energy Center of Wisconsin
455 Science Drive, Suite 200, Madison, WI 53711
Phone: 608.238.8276 x123
Fax: 608.238.0523

The Buildings Team
Design decisions through energy, economics and emissions analysis.
www.ecw.org/Buildings<http://www.ecw.org/Buildings>

Energy Center University
Your gateway to sustainable design training and online education programs.
www.ecw.org/university/<http://www.ecw.org/university/>
________________________________
From: M. Shields [mailto:mshields at fstrategies.com]
Sent: Thursday, March 18, 2010 12:04 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Schedules

Hi All,

I was wondering if there is a good way to adjust the schedules within the wizard.  As far as I can tell equest only has the minimum/maximum values on the side and the start/end hour along the top.  I know how to set up the schedules in the detailed mode, but all those changes get lost if I go back into the wizard.  Thanks for any help.

Michael Shields
Facility Strategies Group
2222 Gold Hill Road, Suite 5
Fort Mill, SC 29708
Phone: 803-493-4507
Fax: 803-548-2511
Email: mshields at fstrategies.com<mailto:mshields at fstrategies.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100319/67866e72/attachment-0002.htm>