[Equest-users] Modeling a Variabl Refrigernat Flow wystem forLEEDwith eQuest. Has anyone tried?

Li, Lan lli at sbmce.com
Mon Mar 22 12:04:12 PDT 2010


I went to an eQuest seminar at the end of Feb. The professor said eQuest
can not simulate VRF yet. He did not say if it can model "heat pump"
type though.

 

Lan

 

________________________________

From: Paul Brooks [mailto:equestpaul at yahoo.com] 
Sent: Monday, March 22, 2010 9:57 AM
To: Gary.Schrader at buildings.schneider-electric.com;
equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Modeling a Variabl Refrigernat Flow wystem
forLEEDwith eQuest. Has anyone tried?

 

Thank you.  I will search for them in the archives.  If I need any
additional help or have additional questiosn I will psot them here.

 

Thank you again!

 

________________________________

From: "Gary.Schrader at buildings.schneider-electric.com"
<Gary.Schrader at buildings.schneider-electric.com>
To: equest-users at lists.onebuilding.org
Sent: Mon, March 22, 2010 9:23:41 AM
Subject: Re: [Equest-users] Modeling a Variabl Refrigernat Flow wystem
for LEEDwith eQuest. Has anyone tried?




Paul,

 

I have modeled a VRF system (Daikin) in eQuest and have an E-Mail or two
in the archives to describe the process. Search through those and you
should be able to find something I have posted.

 

Note that I modeled a "heat pump" system and not a "heat recovery"
system. I haven't found a good way to do the latter in eQuest. (Yet!)

 

I don't have my original messages readily available but can open up some
old Outlook archive files if you don't have any luck in the archives.

 

Thanks,

Gary


________________________________________________________________________
_______________________________________________

Gary Schrader | Schneider Electric | Buildings Business | Energy
Solutions | Engineer I
Phone: +1 | Mobile: +1 913 217 8068 | Fax: +1 913 469 0206
Email: gary.schrader at buildings.schneider-electric.com | Site:
www.schneider-electric.com/buildings | Address: 16011 College Boulevard,
Suite 212, Lenexa, KS 66219, USA

*** Please consider the environment before printing this email.

 

 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Paul
Brooks
Sent: Monday, March 22, 2010 8:14 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling a Variabl Refrigernat Flow wystem for
LEEDwith eQuest. Has anyone tried?

Has anyone attempted to model a VRF system using equest?  Was it also
for LEED?  Can you describe the approach please?

 

Thanks!



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100322/1afe9a90/attachment-0002.htm>


More information about the Equest-users mailing list