[Equest-users] eQuest: Heat rejection using Geo Thermal HX and cooling tower in hybrid

[Akshay Kumar Gupta]

Dear all,

 

Iam trying to model heat rejection system which consists of Geo thermal heat
exchange system (GTHX) with vertical closed loop using series of bore holes
in combination with cooling towers.

So that the condenser water rejects as much heat to the ground first and
remaining heat can be rejected to the cooling towers.

For GTHX energy is consumed to remove heat within a closed loop buried pipe.
Small circulating motor is adequate to remove heat from the condenser water
and energy savings can be obtained using this.

 

Does someone have any idea as to how to combine these two systems in eQuest?

Is there any way by which we can use equipment sequencing to model this?

Best regards

Akshay Kumar Gupta

Kalpakrit Sustainable Environments Pvt. Ltd.  

New Delhi

Tel: +91.124.4309490-92 Ext: 312 , Fax: +91.124.4309493

E-mail : akshay at kalpakrit.com

 

Disclaimer: The information contained in this message is confidential and
may be legally privileged. The message is intended solely for the
addressee(s). If you are not the intended recipient, you are hereby notified
that any use, dissemination, or reproduction is strictly prohibited and may
be unlawful. If you are not the intended recipient, please contact the
sender by return e-mail and destroy all copies of the original message. The
views expressed in this e-mail message (including any attachments) are those
of the individual sender except where the sender expressly, and with
authority, states them to be the views of Kalpakrit or its group companies
and the same shall be subject to the terms and conditions in governing
contract in writing, if any. Kalpakrit or its group companies have all
authority to check all emails being exchanged using the above address.

 

* Please consider the environment before printing this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100506/216337c8/attachment.htm>