[Equest-users] LOOP-PUMP & CHW-PUMP

[聃王]

Dear all

I found a question when i creat a loop for condensor water , there is a pump
requierment for this loop, after that ,there is another pump creation
reqiurement when i creat a cooling Tower ,so what's the different between
loop-pump and CHW-pump.
Here are the definition for both:
Loop-pump: Accepts a u-name of the pump attached to this loop. you should
use this keyword to attach a pump directly to a loop.
CHW-LOOP: Take the u-name of a pump directly attached to the chiller's
evaporator. Usually ,this pump will be a equipmentrecirculation pump and
will act to decouple the flow of the chiller from the loop. In this case,
the pump may have CHW-FLOW-CTRL=CONSTANT-FLOW or---

 Will anyone tell me the difference ?
Many thanks


----------------------------------------------
Dang Wang,     LEED AP

Design Manger

Room 1008, Zhenyuan Building, No.2052
North Zhongshan Rd, Shanghai, P.R.China 200063
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100524/01910e6c/attachment.htm>