[Equest-users] Buildign seems to compile, but simulation will not run...HELP!

[Paul Brooks]

Carol and John:

I checked both the BDL and the INP file, no errors.  they are attached for your review if you can

Thanks!


 



________________________________
From: John Aulbach <jra_sac at yahoo.com>
To: Paul Brooks <equestpaul at yahoo.com>; eQuest user forum <equest-users at lists.onebuilding.org>
Sent: Mon, May 10, 2010 11:30:43 AM
Subject: Re: [Equest-users] Buildign seems to compile, but simulation will not run...HELP!


Paul:

Start in the .BDL file. This is your .INP file as digested by DOE-2 as it does its error checking before allowing the simulation.

There should be messages telling you what your problem may be. Or send your .INP and .PD2 files to me and I will give them a quick look.



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com



________________________________
From: Paul Brooks <equestpaul at yahoo.com>
To: eQuest user forum <equest-users at lists.onebuilding.org>
Sent: Mon, May 10, 2010 8:21:46 AM
Subject: [Equest-users] Buildign seems to compile, but simulation will not run...HELP!


I have completed a building in DD wizard.  I did my initial set-up of the HVAC system and plants in DD wizard.  I completed plant work in Detail Mode.  When I compile the file, I do not get any warnings or errors.  When I ask for a simulation, eQuest seems to do the load calcs just fine, but when it begins simulation, it states theeis an error, but I do not know what it is, or how to find it.  

Any ideas on what I should do, or where to look for the error?

Thanks  


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/a77775e9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ZA As Designed.BDL
Type: application/octet-stream
Size: 1433347 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/a77775e9/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ZA As Designed.inp
Type: application/octet-stream
Size: 921061 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/a77775e9/attachment-0003.obj>