[Equest-users] VRF in eQuest

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Mon May 10 11:44:05 PDT 2010


Can't be done explicitly in eQuest.   I searched the
www.onebuilding.orgarchives for VRV and VRF to see what past
discussions and advice has been
put out there.  At this point this is the best suggestion I can give.  I'm
trying to model one now for a LEED project--not a smooth process.

pasha

On Mon, May 10, 2010 at 10:21 AM, Lopez, Phylroy
<Phylroy.Lopez at stantec.com>wrote:

>  Has anybody done a VRF system in eQuest? Or know of any resources that
> would detail how to do this?
>
>
>
> I want to make sure I am not rebuilding the wheel here.
>
>
>
>
>
>
>
> *Phylroy Lopez B.Eng LEED A.P.*
> Sustainable Building Specialist
> Stantec
>
> 1100 - 111 Dunsmuir Street
> Vancouver BC V6B 6A3
> Ph: (604) 696-8337
> Fx: (604) 696-8100
>
> *stantec*.com <http://www.stantec.com/>
>
>
>
> The content of this email is the confidential property of Stantec and
> should not be copied, modified, retransmitted, or used for any purpose
> except with Stantec's written authorization. If you are not the intended
> recipient, please delete all copies and notify us immediately.
>
>
>
> ü Please consider the environment before printing this email.
>
>
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Rob Hudson
> *Sent:* Thursday, May 06, 2010 1:16 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Reheat/preheat/heating help
>
>
>
> I have a constant volume VAV system with a preheat coil, no heating coil,
> and reheat box at the terminal.  The preheat is steam and the reheat is hot
> water.  I am looking for verification on the way i set this up in the
> model.  I set the heating capacity to 0 on the system level and entered in a
> preheat coil under the preheat/baseboard tab.  Also under the preheat tab, i
> entered my capacity and leaving air temp (50deg).  On the coil cap/control
> tab i have entered my zone entering max supply temp = 87 deg, thats the temp
> i want the reheats to go up to.  Then under each separate VAV zone, i
> entered the reheat capacity under the Maximum Heating Rate.
>
> Let me know if i confused anyone or need to send pictures or files.
>
> --
> Rob Hudson
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/733dfc2a/attachment-0001.htm>


More information about the Equest-users mailing list