[Equest-users] VRF in eQuest

Carol Gardner cmg750 at gmail.com
Mon May 10 12:04:14 PDT 2010


Here's some guidance that's out there.

Carol

On Mon, May 10, 2010 at 11:44 AM, Pasha Korber-Gonzalez <
pasha.pkconsulting at gmail.com> wrote:

> Can't be done explicitly in eQuest.   I searched the www.onebuilding.orgarchives for VRV and VRF to see what past discussions and advice has been
> put out there.  At this point this is the best suggestion I can give.  I'm
> trying to model one now for a LEED project--not a smooth process.
>
> pasha
>
> On Mon, May 10, 2010 at 10:21 AM, Lopez, Phylroy <
> Phylroy.Lopez at stantec.com> wrote:
>
>>  Has anybody done a VRF system in eQuest? Or know of any resources that
>> would detail how to do this?
>>
>>
>>
>> I want to make sure I am not rebuilding the wheel here.
>>
>>
>>
>>
>>
>>
>>
>> *Phylroy Lopez B.Eng LEED A.P.*
>> Sustainable Building Specialist
>> Stantec
>>
>> 1100 - 111 Dunsmuir Street
>> Vancouver BC V6B 6A3
>> Ph: (604) 696-8337
>> Fx: (604) 696-8100
>>
>> *stantec*.com <http://www.stantec.com/>
>>
>>
>>
>> The content of this email is the confidential property of Stantec and
>> should not be copied, modified, retransmitted, or used for any purpose
>> except with Stantec's written authorization. If you are not the intended
>> recipient, please delete all copies and notify us immediately.
>>
>>
>>
>> ü Please consider the environment before printing this email.
>>
>>
>>
>> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
>> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Rob Hudson
>> *Sent:* Thursday, May 06, 2010 1:16 PM
>> *To:* equest-users at lists.onebuilding.org
>> *Subject:* [Equest-users] Reheat/preheat/heating help
>>
>>
>>
>> I have a constant volume VAV system with a preheat coil, no heating coil,
>> and reheat box at the terminal.  The preheat is steam and the reheat is hot
>> water.  I am looking for verification on the way i set this up in the
>> model.  I set the heating capacity to 0 on the system level and entered in a
>> preheat coil under the preheat/baseboard tab.  Also under the preheat tab, i
>> entered my capacity and leaving air temp (50deg).  On the coil cap/control
>> tab i have entered my zone entering max supply temp = 87 deg, thats the temp
>> i want the reheats to go up to.  Then under each separate VAV zone, i
>> entered the reheat capacity under the Maximum Heating Rate.
>>
>> Let me know if i confused anyone or need to send pictures or files.
>>
>> --
>> Rob Hudson
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/b54414e3/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: VRV-VRF systems Dana Troy.pdf
Type: application/pdf
Size: 1683544 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/b54414e3/attachment-0001.pdf>


More information about the Equest-users mailing list