[Equest-users] SD or DD

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Sat May 22 23:07:40 PDT 2010


Hi Yehuda,

If I were in your shoes I would...

   1. Start in the DD wizard and get my footprint, zones & custom window
   placements in for the input.
   2. Input any other "global" type inputs into the DD wizard (i.e. LPD
   values, EPD values, and maybe my basic HVAC systems template to get me
   started as I then will switch to DDedit mode...
   3. "Save As" my wizard file with a new name (i.e. Project Name
   Proposed-ddedit May XX.pd2)
   4. In the new file, switch into DDedit mode and now focus my attention
   & time into the detailed input data that I need to focus on from here on
   out.

In general the wizards are a great place to start any model, but not really
too reliable nor do you have many options for detail input if you have
restricted your model to only the "wizards."

Feel free to contact me if you have any questions about how I would approach
the first steps of this model.

Cheers,
Pasha


On Sat, May 22, 2010 at 1:52 PM, Yehuda Israel
<yehuda at newsource-energy.com>wrote:

>  To all:
>
>
>
> I am modeling an existing building for an energy audit in NY.  I am not
> sure if I should use the SD or DD Wizard.  Does anybody have any advise?
>
>
>
> Thank you,
>
>
>
> Yehuda
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100523/d76208d0/attachment-0002.htm>


More information about the Equest-users mailing list