[Equest-users] too many roofs

[Jackson, Alan]

Carol

 

Thank you. This was exactly what I was looking for. I didn't realize by
specifying a construction type you create the surface. This offers great
flexibility now.

 

Regards,

 

Alan Jackson, LEED AP
KlingStubbins

 

From: Carol Gardner [mailto:cmg750 at gmail.com] 
Sent: Monday, May 24, 2010 7:46 PM
To: Jackson, Alan
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] too many roofs

 

Not true. See screen 3 of 25 in the DD wizard. Look at the pull down
menu. You will see the option to select no exterior exposure. On same
screen look at pull down menu for floors, etc. Also look at screen 1 of
25 to specify # of floors. You can call each floor a shell if you want
to. Or you can call your dog or cat Shell.....
Best,
Carol

On Mon, May 24, 2010 at 2:14 PM, Jackson, Alan
<ajackson at klingstubbins.com> wrote:

So from what I can tell if you build more than one shell geometry in the
DD wizard you end up with more than one roof. 

 

What is the method for handling this so I ultimately end up with only
one external roof surface. I feel like deleting the extra roof surfaces
is a bad idea. 

 

Alan Jackson, LEED AP
HVAC Project Engineer / BIM Team Leader


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Carol Gardner PE

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100525/b7a379ad/attachment-0002.htm>