[Equest-users] District cooling plant modeling

[aida darghouth asli]

Dear all,
I'm trying to model a building which has a districy cooling plant, i find in
the rachive the message below
I want to ask how can i add the chilled water meter and where i can find it.
Thank you for any assistance.
DAKA



*Vikram Sami* VSami at lasarchitect.com
<equest-users%40lists.onebuilding.org?Subject=Re%3A%20%5BEquest-users%5D%20District%20Cooling%20in%20eQUEST&In-Reply-To=%3C55BA83825A482144A8637F9CAA981F760D78470C%40las-mail.lordaecksargent.internal%3E>
*Tue Jul 8 21:32:15 PDT 2008*


   - Previous message: [Equest-users] District Cooling in
eQUEST<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000137.html>
   - Next message: [Equest-users] SS-R Report - Part Load
Hours<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000138.html>
   - *Messages sorted by:* [ date
]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/date.html#142>
    [ thread ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/thread.html#142>
    [ subject ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/subject.html#142>
    [ author ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/author.html#142>

------------------------------

Actually - if you set up a chilled water utility rate structure and
aply it to the meter, it shows up in the summary graphs (your right -
it doesn't show up in the reports though).



Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional
Servicewww.lordaecksargent.com

________________________________

From: equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
on behalf of Brian Fountain
Sent: Tue 7/8/2008 09:51
To: Colleen Nelson; equest-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
Subject: Re: [Equest-users] District Cooling in eQUEST



In wizard mode, you can only select chillers for your cooling plant.
However, once you "make the jump" to detailed mode, you can add a
chilled water meter and delete the chiller and associated cooling tower,
condenser pump and condenser loop.  The chilled water meter acts like
the district cooling system supply.

Note that you will have to look to the detailed reports (the .sim
outputs) for many of your results as some of the eQUEST summary reports
do not included the chilled water meter values (as they are limited to 2
energy types).



Colleen Nelson wrote:
>* Dear eQUEST users,*>**>* I am looking for some 'how-to's' on modeling a district cooling plant*>* in eQUEST.*>**>* I have selected Chilled Water Coils as the Cooling Source in HVAC*>* System Definitions screen of Schematic Design Wizard.  I don't see*>* District Cooling as a Chiller Type choice in Cooling Primary Equipment.*>**>* Does anyone have experience with modeling this type of plant?*>**>* Thanks in advance for any assistance.*>**>* cnelson at michaudcooley.com <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>*>**>* *>* *>* ------------------------------------------------------------------------*>**>* _______________________________________________*>* Equest-users mailing list*>* http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org*>* To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>*>*  *>* ------------------------------------------------------------------------*>**>* No virus found in this incoming message.*>* Checked by AVG.*>* Version: 7.5.524 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26 AM*>*  *
_______________________________________________
Equest-users mailing
listhttp://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>


------------------------------


   - Previous message: [Equest-users] District Cooling in
eQUEST<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000137.html>
   - Next message: [Equest-users] SS-R Report - Part Load
Hours<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000138.html>
   - *Messages sorted by:* [ date
]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/date.html#142>
    [ thread ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/thread.html#142>
    [ subject ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/subject.html#142>
    [ author ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/author.html#142>

------------------------------
More information about the Equest-users mailing
list<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101107/5d06b463/attachment.htm>