[Equest-users] How can I get rid of an item in the reports .. ( PUMPS)

[Howe, Timothy]

It is Pump/Aux value.  There must be a auxiliary load someplace if there are not any pumps in the model.

Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
61 Commercial Street
Rochester NY 14614
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681
stantec.com<http://www.stantec.com>

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

ü Please consider the environment before printing this email.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alex Hernandez
Sent: Monday, November 29, 2010 3:06 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How can I get rid of an item in the reports .. ( PUMPS)

How can I get rid of the PUMP value in the report I only need Heat Reject and Miss Equipment ..I removed from the simulation but still shows up ?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101129/69227525/attachment-0001.htm>