[Equest-users] How can I get rid of an item in the reports ..( PUMPS)

Alex Hernandez jahgeme61 at yahoo.com
Mon Nov 29 12:53:56 PST 2010


Allan 

I do have pumps in the model but I do noit want to take in account their energy usage and not to show up in the report.
Thanks 

Alex




From: Alan Crittendon <alanc at dwcei.com>
To: equest-users at lists.onebuilding.org
Cc: 
Sent: Monday, November 29, 2010 12:24:43 PM
Subject: Re: [Equest-users] How can I get rid of an item in the reports ..( PUMPS)


 
Check your pilot lights.  If you have fuel
fired equip it defaults to having a pilot light “load”.  Under airside,
heating, unitary power, furnace fuel aux.
 
Alan Crittendon,
PE, LEED AP
DW Collier Engineering, Inc.
720 Broadway St.
Suite100
South Fulton, TN 38257
(p) 731-479-2115
(f) 731-479-8018
From:equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Howe, Timothy
Sent: Monday, November 29, 2010
2:08 PM
To: Alex Hernandez;
equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] How
can I get rid of an item in the reports ..( PUMPS)
 
It is Pump/Aux value.  There must be a auxiliary load someplace if
there are not any pumps in the model.
 
Timothy
Howe, MS, LEED® AP
Mechanical Engineer
Stantec
61 Commercial Street
RochesterNY 14614
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681
stantec.com 
 
The content of this email is the
confidential property of Stantec and should not be copied, modified,
retransmitted, or used for any purpose except with Stantec's written
authorization. If you are not the intended recipient, please delete all copies
and notify us immediately.
 
ü Please consider the environment before printing
this email.
 
From:equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alex Hernandez
Sent: Monday, November 29, 2010
3:06 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How can I
get rid of an item in the reports .. ( PUMPS)
 
How can I get rid of the PUMP value in the report I only need Heat
Reject and Miss Equipment ..I removed from the simulation but still shows up ?


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101129/b5a78939/attachment-0001.htm>


More information about the Equest-users mailing list