[Equest-users] Fan energy typed in as kW/cfm

[Ashu Gupta]

Hi Topp,

Just do right click on Static in WG tab and do default, then KW/CFM tab will
automatically activate.

Thanks,
Ashu

On Tue, Nov 16, 2010 at 2:52 PM, TOPP - Per Topp <TOPP at orbicon.dk> wrote:

>  Hi
>
>
>
> Just a simple question. I want to type in the fan energy as kW/cfm. But it
> seems I cannot “activate” that input option. How do I switch from the SUPPLY-STATIC
> and SUPPLY-EFF to the SUPPLY-DELTA-T and SUPPLY-KW/FLOW option?
>
>
>
>
>
> Best regards,
>
> *Per Topp
> *Senior Projektingeniør
> Installation, El & VVS (Ballerup)
>
> Tel. dir. +45 44 85 87 09
> Mobile: +45 61 55 60 15
> TOPP at orbicon.dk
>
> *Orbicon | Leif Hansen A/S
> *Lautrupvang 4B, DK-2750 Ballerup
> Tel. +45 44 85 86 87 Fax +45 44 85 86 78
>
> P Please consider the environment before printing.
>
> It is possible to edit the contents of this e-mail electronically,
> therefore we cannot guarantee that it has not been changed after
> distribution. This e-mail may contain confidential information. Please be
> notified that if you are not the intended recipient, then you are prohibited
> from distributing, copying or archiving this e-mail. Please delete the
> e-mail and contact the sender as soon as possible.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Ashu Gupta
Project Engineer,
Kamal Cogent Energy Pvt. Ltd.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101116/d672719c/attachment-0002.htm>