[Equest-users] How can I get rid of an item in the reports ..( PUMPS)

[Alan Crittendon]

Check your pilot lights.  If you have fuel fired equip it defaults to having
a pilot light "load".  Under airside, heating, unitary power, furnace fuel
aux.

 

Alan Crittendon, PE, LEED AP
DW Collier Engineering, Inc.

720 Broadway St.

Suite 100

South Fulton, TN 38257
(p) 731-479-2115
(f) 731-479-8018 

  _____  

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Howe,
Timothy
Sent: Monday, November 29, 2010 2:08 PM
To: Alex Hernandez; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] How can I get rid of an item in the reports ..(
PUMPS)

 

It is Pump/Aux value.  There must be a auxiliary load someplace if there are
not any pumps in the model.

 

Timothy Howe, MS, LEEDR AP
Mechanical Engineer
Stantec

61 Commercial Street
Rochester NY 14614
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

 <http://www.stantec.com> stantec.com 

 

The content of this email is the confidential property of Stantec and should
not be copied, modified, retransmitted, or used for any purpose except with
Stantec's written authorization. If you are not the intended recipient,
please delete all copies and notify us immediately.

 

* Please consider the environment before printing this email. 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alex
Hernandez
Sent: Monday, November 29, 2010 3:06 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How can I get rid of an item in the reports .. (
PUMPS)

 

How can I get rid of the PUMP value in the report I only need Heat Reject
and Miss Equipment ..I removed from the simulation but still shows up ?

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101129/e88da07c/attachment-0002.htm>