[Equest-users] Error in LEED Compliance Check

[Andy Harrison]

Hi All,

I'm getting a rules evaluation error described as "Table look-up failed: A901-07_Envelope(1,4) evaluation rule: Look-up and default C-FACTOR for slabs", when carrying out a LEED compliance check.  The error code is listed as "Error", and there's no navigation option, so I'm not sure how to go about resolving this.  I've attached a screen shot - any suggestions would be very much appreciated.

Regards and thanks,

Andrew

[cid:image001.png at 01CB63AC.FC486A00]




[cid:image002.png at 01CB63AC.FC486A00]
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101004/6a366446/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 25717 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101004/6a366446/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 122514 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101004/6a366446/attachment-0001.png>