[Equest-users] Report Generator Error

[Grammy]

I shorten your file name and run in equest, it works fine.

You can have a try.

Normally, I only use the name like "01 baseline.inp" to make sure the length
of the file name and address will not exceed the limitation.

On Fri, Oct 8, 2010 at 3:02 AM, Justin Chin <jchin.bu at gmail.com> wrote:

> Hello EQuest users,
>
>  I was trying to simulate a model, however the sim file didnt show
> any of the plant, system or zone reports.  This was due to the
> following error
>
>  ***ERROR***********************************************************************
>          Report generator error reading data record:
>          Record total length =***** Iuniq = ***** Command =     1
>          Format = ***** number of values rec len =*****.
> Does any one know what this error is being caused by?  Attached is my
> inp file of the model.  Any help is appreciated.
>
> Thanks
> Justin Chin
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101008/7bb652ed/attachment-0001.htm>