[Equest-users] sloped roof in equest

Wolfe, Brian bwolfe at hksinc.com
Tue Oct 12 13:37:35 PDT 2010


Equest won't allow you to create in the wizard then, switch out of the wizard to make changes then, back again with the changes made.  Once you switch out of the wizard, you stuck.

BRIAN J. WOLFE, CDT, LEED AP BD+ C
SUSTAINABLE DESIGN COORDINATOR
HKS, INC.
1919 McKINNEY AVENUE
DALLAS, TX 75201
214.969.5599 ext.3669
bwolfe at hksinc.com
www.hksinc.com
If you are sending file(s) always use my Thru DROPBOX<https://hks.thruinc.net/drop_box.asp?toemail=bwolfe@hksinc.com>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of deepika khowal
Sent: Tuesday, October 12, 2010 3:16 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] sloped roof in equest

Hi All

I am trying to model a sunroom which has sloped roof.
I made the model in SD wizard but when am changing the vertices in the design data model mode to change the roof to sloped,  am not able to save the changes if I open the wizard again.
Also if I create a new polygon (triangle shaped to complete the sloped roof), am not able to see that in my model.
if anyone have any inputs, it will be highly appreciated.

Thanks
Regards
Deepika

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101012/a3afced3/attachment-0001.htm>


More information about the Equest-users mailing list