[Equest-users] SS-J Cooling DD Load Absent

[Carol Gardner]

Check your heating & cooling temp schedules.

On Fri, Oct 29, 2010 at 6:35 AM, Jonathan Smith <jsmith at csarchpc.com> wrote:

>  eQuesters:
>
>
>
> I have a model where the SS-J – DESIGN DAY reports no cooling load on
> COOLING or DAY COOLING PEAK, while hourly heating loads are reporting. I
> have both CDD and HDD set up in Project & Site. The system
> COOLING-CAPACITIES are left blank so as to auto-size. Report LS-D shows
> Design Day report  with space cooling loads.
>
>
>
> Any hypotheses as to why the cooling loads are absent from the system CDD
> run?
>
>
>
> Thanks in advance.
>
>
>
> *Jonathan R. Smith AIA LEED*®*AP*
>
>
>
> [image: signature-logo_60%]
>
> 40 Beaver Street
> Albany, New York 12207
> p: 518.463.8068 x268
> f: 518.463.8069
> www.csarchpc.com
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101031/adf539af/attachment-0002.htm>