[Equest-users] A model that works one day, but not the next, getting Error 1

Philip Drader pdrader at mi-group.ca
Tue Sep 7 12:57:06 PDT 2010


Hello all,

I'm officially stymied, I had encountered Error 1 before, so I went back to
a previous build and modified a couple of things, I went through 5 changes
and all ran successfully (this was yesterday, when the sun was shining and
the birds were singing). Right now, I can't get the models to run at all
(which had been working yesterday), and I'm not sure where to fix the errors
that show up in the BLD file.

I've attached my .pd2 in case any generous soul can show me how to fix this
issue and keep it from occurring again.

 Thanks in advance,
Philip

Philip Drader, B.A Sc, LEED AP HOMES
Sustainable Design Specialist
Mindscape Innovations
ph:519-744-3592x223
pdrader at mi-group.ca
www.mi-group.ca

FROM THE HORIZONS OF THE MIND, BUILDING DREAMS INTO REALITIES

---
The content of this email is the confidential property of Mindscape
Innovations (Mindscape) and shall not be copied, modified, retransmitted, or
used for any purpose except with Mindscape's written authorization. If you
are not the intended recipient, please destroy all copies and notify us
immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100907/b0e3c301/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BWI-001-2010-09-06_try7.pd2
Type: application/octet-stream
Size: 102433 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100907/b0e3c301/attachment.obj>


More information about the Equest-users mailing list