[Equest-users] Radiant ceilings
Shalini Modi
shalinimodi at msn.com
Mon Apr 25 10:31:34 PDT 2011
Hello all,
I need to model radiant ceiling for heating and cooling both. As per the suggestions in the archive (quoted below), I kept the system as VAV, reduced fan usage to represent radiant slab system's fan usage, kept my heating by water loop baseboards and cooling by DX and coil head and loop temperatures as per radiant slab system but after selecting the system type as 'VAV', in the cooling page, it won't allow me to select 'electric DX' as the cooling source.
Kindly advice how can I solve this problem.
Thanks a lot,
Shalini
[Equest-users] How do I model a building with radiant slab heat ANDair conditioning?
Bishop, Bill
wbishop at pathfinder-ea.com
Tue Mar 2 14:03:52 PST 2010
Previous message: [Equest-users] How do I model a building with radiant slab heat AND air conditioning?
Next message: [Equest-users] ASHRAE Baseline EUI
Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Rob,
Select the system based on the DX air conditioning, then add hot water
baseboards for the radiant slab. Set your baseboard capacity, coil head,
loop temperature etc. to match the radiant slab heating system.
Regards,
Bill
William Bishop, EIT, LEED(r) AP | Pathfinder Engineers & Architects LLP
Mechanical Engineer
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.
________________________________
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rob
Rosen
Sent: Tuesday, March 02, 2010 4:34 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How do I model a building with radiant slab heat
ANDair conditioning?
To All,
Is it possible to model a building with radiant slab heat (hot water
loop) and air conditioning? It appears to me that the eQUEST airside
system type for radiant slab heating is FPH (floor panel heating
system), and that this is "heating only".
Can anyone suggest a way to model a building that has both radiant slab
heating and DX air conditioning?
Thanks,
Rob Rosen
Senior Energy Analyst
Taitem Engineering
110 S. Albany St.
Ithaca, NY 14850
Phone: 607-277-1118 ext 110
Fax: 607-277-2119
www.taitem.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100302/e0ae9990/attachment.htm>
Previous message: [Equest-users] How do I model a building with radiant slab heat AND air conditioning?
Next message: [Equest-users] ASHRAE Baseline EUI
Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the Equest-users
mailing list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110425/fec40cf7/attachment.htm>
More information about the Equest-users
mailing list