[Equest-users] Air Infiltration Rate

[Darcy Dwyer]

When inputting blower door test results into the Schematic Design Wizard,
should the value be in CFM50 or CFM?

I know that in detailed mode, eQUEST gives the option of inputting factors
that effect air infiltration rates, such as height, leakiness, shielding,
and climate correction factors, which are all typically used to convert from
CFM50 to CFM, so I am assuming the input is CFM50, but wanted to confirm.

Darcy Dwyer
Smith College '11
Picker Engineering Program
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110426/124dc21e/attachment.htm>