[Equest-users] G3.1.3.15 VAV Fan Part Load Performance

[Grammy]

I think your way is ok, but normally I use the equation in method 2.

On Tue, Apr 5, 2011 at 7:18 AM, Ashok Vijayashree <
vijayashree.ashok at gmail.com> wrote:

> Thanks Grammy.
>
> I have chosen the data points method. My Independent value will be the Fan
> Part Load Ratio (0.00, 0.10, 0.20 ....) and Dependent value will be the
> fraction of full-load Power (0.00, 0.03, 0.07 ....) Is this correct?
>
> Ashok
>
> On Sun, Apr 3, 2011 at 10:55 PM, Grammy <grammy.hkust at gmail.com> wrote:
>
>> Hey,
>>
>> Create a performance curve first, then in system fan setting page, choose
>> fan control as Fan EIR FPLR, select the fan curve you creating.
>>
>>   On Sun, Apr 3, 2011 at 10:01 PM, Ashok Vijayashree <
>> vijayashree.ashok at gmail.com> wrote:
>>
>>>   Hello,
>>>
>>> I am modeling baseline system 8 and I need help on how to comply with
>>> G3.1.3.15 VAV fan part-load performance. Can someone tell me how to create
>>> this part load in equest?
>>>
>>> Thanks in advance!!
>>>
>>> Ashok
>>>
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110405/55a22e9b/attachment-0002.htm>