[Equest-users] Difference between wizard and detailed mode

Carol Gardner cmg750 at gmail.com
Wed Apr 13 10:05:22 PDT 2011


Hi Travis,

You need to attach the .inp file that this .pd2 file uses, too.

Carol

On Wed, Apr 13, 2011 at 9:56 AM, Travis Rhodes <TRhodes at smud.org> wrote:

>  I’m trying to set up a really simple 2 story building with 6 rooftop
> units. Two 60 tons supply cooling only to the core of the two floors and the
> 4 15 ton units take care of the perimeter. One unit supplies air to two
> walls on the first floor and another unit takes the other two walls on that
> floor. This is repeated on the second floor. In the wizard I set it up
> exactly like this and inputted the performance data for each unit and named
> each unit but when I go to detailed mode to modify the schedules to reflect
> the controls of the system it has broken everything out completely different
> than what I assumed I had set up in the wizard. I’ve attached the .pd2 file,
> I don’t know if this is sufficient for anyone to look at what I’ve done.
>
>
>
> I appreciate anyone help on this.
>
>
>
> *[image: outlook sig]*
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
> * *
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110413/139cb4cf/attachment-0002.htm>


More information about the Equest-users mailing list