[Equest-users] Shifting one building post simulation

[Kushagra Juneja]

Hi Rob, 

 

Many Thanks for your response.

The method suggested would rotate the entire project, however, I wish to
rotate and change coordinates of only one building out of the 13 buildings
in the same model. The remaining 12 continue to exist with the same
orientation as well as location in the model. Looking forward to some help.

 

TYs

 

KJ

  _____  

From: Rob Hudson [mailto:rdh4176 at gmail.com] 
Sent: Monday, April 25, 2011 6:08 PM
To: Kushagra Juneja
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Shifting one building post simulation

 

To rotate any building in the model, simply click on your component tree and
click on "Building Data".  Here you can change the Azimuth of the building,
which will rotate everything in it by the number of degrees that you enter.

 

The weather change requires more work.  First you need to have the weather
file you want to use downloaded already.  To check go to My Documents -
eQuest 3.64 Data - Weather - and then look in the next few folders for the
city that you want.  If you cannot find it, a simple way of getting it is
starting a new equest model and in the wizard locate the city you want.  No
need to change anything else in the wizard, run the model results and let
the program find the file for you.  Go back to the Weater folder and write
down the location of the file and its name, ie mine is for Rochester NY, so
TMY2/ROCHESNY.bin

 

Next in your working model, go to the component tree, double click on the
"Project: xxxx" and on the first tab and change the weater file name to what
you wrote down before.  it will come up with a screen that says something
changed. Just select no and be on your merry way!

 

Hope this helps!

 

Rob

On Mon, Apr 25, 2011 at 1:42 AM, Kushagra Juneja
<kce4 at kamalcogentenergy.com> wrote:

Dear All, 

 

There is a project I am working on which has 13 buildings. The eQuest model
was made and results were obtained. However, I now wish to change the
location of one building out of these thirteen within the model including
its orientation; though the design of the building shall remain the same.
Looking forward to know if such a possibility exists? If yes, how should it
be approached?

  

Many Thanks

 

Kushagra Juneja

Project Engineer

Kamal Cogent Energy Private Limited,

1st Floor, Kamal Ratan Chambers

Opposite GPO, Jaipur- 302001

Rajasthan

Ph: 0141- 2373184

 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Rob Hudson

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110426/a5add1da/attachment-0002.htm>