[Equest-users] External Adiabatic

[Mark Darrall]

Following on, I realized, reading this, that this may be appropriate for my model, where one "exterior" wall is shared with an adjacent warehouse. I'm now working in detailed entry mode now - how can I now make this setting change for this wall without going back into wizards?

Thanks!

MARK DARRALL, AIA, LEED AP BD+C, NCARB
Senior Project Manager

[cid:image003.jpg at 01CC04C2.69BDBA70]

DESIGN ENRICHING LIFE // LIFE ENRICHING DESIGN

A2SO4 Architecture, LLC
Union Station
300 South Meridian Street / 250
Indianapolis, Indiana 46225
TEL  317 388 8850
FAX  317 280 0692
MOB 765 749 0841
www.a2so4.com

Please consider the environment before printing this e-mail.

CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this email in error, please notify the sender immediately and delete the original message. Neither the sender nor the company for which he or she works accepts any liability for any damage caused by any virus transmitted by this email.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Chris Swanson
Sent: Wednesday, April 27, 2011 9:56 AM
To: Arpan Bakshi; equest-users
Subject: Re: [Equest-users] External Adiabatic


See below.  Nick gives a good explanation when I posed the same question a couple weeks ago.



Chris Swanson, EI

Mechanical Design Engineer

Roger D. Fields & Associates

(614) 451-2248



-------------------------------------------------------------------------------------------------------------------
"A suggestion for you both:

Right click any side of a shell during DD wizards at the zone definition screen (after any custom footprint/zoning patterns) to make that wall section "entirely adiabatic."  This sidesteps making any extra shells/systems and avoids having to back any figures out later.  Screengrab following illustrates where I'm talking about - results in the background.

You can accomplish the same net effect in detailed mode in various ways, but I think this is probably the easiest/fastest approach if you know from the start you want to model only part of a building with exterior exposures.

[cid:image004.png at 01CC04C2.69BDBA70]

Best of luck!

~Nick

[cid:image005.jpg at 01CC04C2.69BDBA70]

NICK CATON, E.I.T.
PROJECT ENGINEER
Smith & Boucher Engineers
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
www.smithboucher.com

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Bruce Easterbrook
Sent: Wednesday, April 06, 2011 9:58 AM
To: Chris Swanson
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] How to model part of a building?

You have the right idea.  Depending on the building of course, but I try to lump the part you aren't concerned about onto one AHU, and default everything in that portion.  You are only concerned about the intersecting wall and it's condition.  Add your other AHU's and zoning for the portion you want to work on.  With the one extra AHU is makes it relatively easy to back out its numbers from the building analysis and you are left with what you want.
Bruce Easterbrook P.Eng.
Abode Engineering

On 06/04/2011 10:15 AM, Chris Swanson wrote:
Hello all,

I'm looking for recommendations of how to model just one section of a building in eQUEST.  Three sides are exterior walls, while the fourth is connected to the rest of the building, and therefore next to a conditioned space.  Would the best method be to just use two separate shells (1 - the building "wing" I'm analyzing, 2 - the rest of the building), although I'm only concerned with one of them?  Is there a better way to do this?  I'm hoping someone can point me in the right direction.

Thanks,

Chris Swanson, EI
Mechanical Design Engineer
Roger D. Fields & Associates
Columbus, Ohio 43220-2777
E-mail: cswanson at rdfa.com<mailto:cswanson at rdfa.com>"






_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>





-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Arpan Bakshi
Sent: Wednesday, April 27, 2011 9:48 AM
To: equest-users
Subject: [Equest-users] External Adiabatic



I can't find this thread I remember seeing about turning an exterior surface adiabatic where new construction meets existing building, ideas?









Arpan Bakshi, LEED AP BD+C

YRG sustainability

_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110427/bae77ae8/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 2061 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110427/bae77ae8/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 66184 bytes
Desc: image004.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110427/bae77ae8/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image005.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110427/bae77ae8/attachment-0005.jpg>