[Equest-users] 2-Pipe Circulation Loop

[R B]

The way I have done it is to set up secondary chilled water and hot water
loops (with your existing loops as primary), and set the control on these to
schedule or snap on OA temp.
-Rohini
On Thu, Aug 25, 2011 at 7:49 AM, Raphael, Dan <draphael at ids-troy.com> wrote:

> I’m trying to set up a 2-pipe circulation loop to be used for fan coil
> systems.  I already have a hot water loop and a chilled water loop that are
> serving other systems and want to connect these loops to the 2-pipe loop to
> provide the hot/chilled water.  Is there a way to connect these loops or do
> I have to create a new chiller/boiler for the 2-pipe loop?****
>
> ** **
>
> Thanks in advance.****
>
> ** **
>
> *Dan Raphael*****
>
> Building Performance Analyst****
>
> *Integrated Design Solutions*
>
> Architecture, Engineering, Interiors & Technology**
>
> 1441 W. Long Lake, Suite 200****
>
> Troy, Michigan 48098****
>
> tel:   248.823.2171 ****
>
> fax: 248.823.2200****
>
> www.ids-troy.com****
>
> ** **
>
> <http://www.energystar.gov/>****
>
> ** **
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110825/c4c3b1f9/attachment-0002.htm>