[Equest-users] CHW error message
Varkie C Thomas
thomasv at iit.edu
Thu Dec 15 13:27:20 PST 2011
What causes the error below? The CHW input used all eQUEST defaults. The bldg is high-rise residential. The systems used defaults also (4-pipe FCU). Varkie Thomas
pro Maslak sim DOE-2.2-47h2 12/15/2011 15:03:51 BDL RUN 7
REPORT- ATTN Simulation Messages For Review HVAC Program WEATHER FILE- EPW ISTANBUL,-,TUR
---------------------------------------------------------------------------------------------------------------------------------
***ERROR***********************************************************************
In EL1 Sys1 (FC) , cooling coil leaving temperature must
be at least 6F higher than entering water temp.
***ERROR***********************************************************************
In EL1 Sys1 (FC) , cooling coil leaving temperature must
be at least 6F higher than entering water temp.
***ERROR***********************************************************************
In EL1 Sys1 (FC) , cooling coil leaving temperature must
be at least 6F higher than entering water temp.
***ERROR***********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111215/165bf4cd/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: thomasv.vcf
Type: text/x-vcard
Size: 308 bytes
Desc: Card for Varkie C Thomas <thomasv at iit.edu>
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111215/165bf4cd/attachment-0002.vcf>
More information about the Equest-users
mailing list