[Equest-users] Curve Coefficients

[Grando, John]

Hello,

For the curve COOL-EIR-FT the two inputs for a water loop heat pump system are "entering wetbulb temperature" and "entering water temperature".  I understand that the water temperature is the condenser water, but is the entering wetbulb temperature for the evaporator side?



John Grando LEED AP| Mechanical Engineer






NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110202/72d62133/attachment.htm>