[Equest-users] eQuest - Exhaust Fan Schedule

[David Cantrill]

I am modeling a building which uses exhaust fans in the electrical rooms.  These fans are designed to be on when the room temperature is above 85°F and off when it is below.  How would I set a schedule up in equest to run the fans in this manner?

 

Thank you,

 

 
David Cantrill
Branch Manager - Mississippi
  <http://www.cxgbs.com/> 
CxGBS is not responsible for design concept, design criteria, compliance with codes, design or general construction scheduling, cost estimating, or construction management.  

CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited.  If you have received this transmission in error, please immediately notify us by telephone at (770) 831 6760 and destroy the original transmission and its attachments without reading them. Thank you.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110214/4c24c241/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 11281 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110214/4c24c241/attachment.gif>