[Equest-users] Modeling gas instantaneous water heaters in eQuest

David Cantrill dcantrill at cxgbs.com
Tue Feb 22 12:37:48 PST 2011


I am working on a project that is using instantaneous gas water heaters.
What is the best way to model these in eQuest?

 

Thanks,

 

 
David Cantrill
Branch Manager - Mississippi
  <http://www.cxgbs.com/> 
CxGBS is not responsible for design concept, design criteria, compliance
with codes, design or general construction scheduling, cost estimating,
or construction management.  

CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents,
files or previous e-mail messages attached to it may contain
confidential information that is legally privileged. If you are not the
intended recipient or the person responsible for delivering it to the
intended recipient, you are hereby notified that any disclosure,
copying, distribution or use of any of the information contained in or
attached to this transmission is strictly prohibited.  If you have
received this transmission in error, please immediately notify us by
telephone at (770) 831 6760 and destroy the original transmission and
its attachments without reading them. Thank you.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110222/441795df/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 11281 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110222/441795df/attachment.gif>


More information about the Equest-users mailing list