[Equest-users] Modelling Floors with Different Interior Configurations

[Rob Hudson]

yes, thanks for the correction.
and its only tuesday....

Rob

2011/2/1 Karen Walkerman <kwalkerman at gmail.com>

> I think what Rob meant is "adiabatic", which means that there is no heat
> transfer across the surface.  This is usually an acceptable option for
> buildings where each space is maintained at the same, or similar
> temperatures.
>
> --
> Karen
>
> 2011/2/1 Rob Hudson <rdh4176 at gmail.com>
>
> There is an option when assigning your roof construction in the wizard to
>> make the space be below a conditioned space, and therefore ambient.  I have
>> used this option before and it works beautifully.  if you need more
>> information or a screenshot of what i am talking about let me know.
>>
>> Rob
>>
>> 2011/2/1 Ömer Moltay <omoltay at mimtarch.com>
>>
>> Dear All,
>>>
>>> We are encountering this problem all too often and would like to know if
>>> anybody has a satisfactory solution. For example, in a two storey building,
>>> the interior space configurations in each floor are considerably different,
>>> forcing us to create two separate shells that sit on top of each other in
>>> eQuest schematic wizard. However, when this is the case, eQuest treats each
>>> shell as a separate building and place exterior surfaces (ie. Roofs) between
>>> floors (instead of ceilings). The times it takes to manually convert these
>>> into interior surfaces with the right intra-space relationships is way out
>>> of reasonable limits.
>>>
>>> Is there a way to create a shell with floors that each have different
>>> interior layouts (even different exterior footprints for that matter)?
>>>
>>> Thanks,
>>>
>>> Omer Moltay, LEED AP
>>> Mimta Ltd.
>>>
>>>
>>> -----
>>> Bu iletide virüs bulunmadı.
>>> AVG tarafından kontrol edildi - www.avg.com
>>> Sürüm: 10.0.1204 / Virüs Veritabanı: 1435/3416 - Sürüm Tarihi: 01.02.2011
>>>
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>
>>
>>
>> --
>> Rob Hudson
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110201/2355c9a8/attachment-0001.htm>