[Equest-users] Curve Coefficients

Carol Gardner cmg750 at gmail.com
Sat Feb 5 12:55:25 PST 2011


Sorry, hit the wrong button. I'm not sure which volume the equations are in
but I'll see if I can find and send to you.

Carol

On Sat, Feb 5, 2011 at 12:54 PM, Carol Gardner <cmg750 at gmail.com> wrote:

> Hi John,
>
> The entering wet bulb temperature for the outside air. You will normalize
> the curve around whatever that is to meet the ARI design conditions, 67F
> maybe, I can't remember off the top of my head. There is a full set of
> equations for equipment under Curve-fit for HVAC Equipment, but I'
>
> On Wed, Feb 2, 2011 at 10:17 AM, Grando, John <JGrando at cosentini.com>wrote:
>
>>  I'm basically trying to figure out how eQUEST comes up with the total
>> Electric consumption for a DX coil.  I thought it was the below
>>
>> Total Capacity * Capacity Curve [T] * Total EIR * EIR Curve [T] * EIR
>> Curve [PLR] but it's not coming out exactly the same.  Does anyone have any
>> input for what I'm missing.  The attached .xls is an example for one day.
>> The total capacity is 79.983 kBTU/Hr and the EIR is  0.2722.
>>
>>
>>
>> *John Grando** **LEED AP**| **Mechanical Engineer
>> *
>> Phone: 212-615-3705 | Fax: 212-615-3700
>> jgrando at cosentini.com
>>
>> *Cosentini Associates - A Tetra Tech Company
>> *Two Pennsylvania Plaza - Third Floor - New York, NY 10121
>> *www.cosentini.com* <http://www.cosentini.com/>
>>
>>
>>
>>
>> NOTICE OF CONFIDENTIALITY This E-mail message and its attachments (if any)
>> are intended solely for the use of the addressees hereof. In addition, this
>> message and the attachments (if any) may contain information that is
>> confidential, privileged and exempt from disclosure under applicable law. If
>> you are not the intended recipient of this message, you are prohibited from
>> reading, disclosing, reproducing, distributing, disseminating or otherwise
>> using this transmission. Delivery of this message to any person other than
>> the intended recipient is not intended to waive any right or privilege. If
>> you have received this message in error, please promptly notify the sender
>> by reply E-mail and immediately delete this message from your system.
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>



-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110205/b32852aa/attachment-0001.htm>


More information about the Equest-users mailing list