[Equest-users] how to reduce the unmet hours?

[zhiren zhou]

Dear Charles Land

    I’ve found the results in the BEPU as below

 

                   PERCENT OF HOURS ANY SYSTEM ZONE OUTSIDE OF THROTTLING
RANGE = 14.7

                   PERCENT OF HOURS ANY PLANT LOAD NOT SATISFIED
=  0.0

 

    So how can I reduce the PERCENT OF HOURS ANY SYSTEM ZONE OUTSIDE OF
THROTTLING RANGE?

 

 

 

发件人: Charles Land [mailto:cland at geo-marine.com] 
发送时间: 2011年1月4日 22:46
收件人: zhiren zhou; equest-users at lists.onebuilding.org
主题: RE: [Equest-users] where to find unmet hours in eQUEST

 

You can look either under your summary tab for your unit or in your BEPS or
BEPU in your simulation output.  You can also look at your SS_O to see what
time of the day you zones aren’t being conditioned properly or set up a
hourly report for a specific zone.

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of zhiren zhou
Sent: Tuesday, January 04, 2011 9:43 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] where to find unmet hours in eQUEST

 

Dear all 

         Could anyone tell me how or where to find unmet hours in eQUEST?
Thanks a lot 

 

                                     arron

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110104/ef620b28/attachment-0001.htm>