[Equest-users] Changing building height for a portion of the shell

John Aulbach jra_sac at yahoo.com
Mon Jan 17 15:27:17 PST 2011


If you are in the DD Wizard, you can do two shells. Otherwise, you can make one 
shell in the DD Wizard and make the zones different in the Detailed Edit mode.




________________________________
From: "Ron.Goodman at buildings.schneider-electric.com" 
<Ron.Goodman at buildings.schneider-electric.com>
To: equest-users at lists.onebuilding.org
Sent: Mon, January 17, 2011 2:52:39 PM
Subject: [Equest-users] Changing building height for a portion of the shell


I am modeling an elementary school with a gym at one end.  Is there any way to 
change the ceiling height for a portion of the shell or do I need to create a 
separate shell for the gym. 

I know I can increase the wall heights in detailed mode but would like to do it 
using the DD wizard if possible.
 
Thanks,
 
Ron

_______________________________________________________________________________________________________________________

Ron Goodman, PE, LEED  AP, CEM | Schneider Electric | Buildings Business| Energy 
Solutions | Senior Engineer
Phone:+1 206 583 8785 | Mobile: +1 206 883 5948                  Fax: +1 206 583 
8826
Email: ron.goodman at buildings.schneider-electric.com        Site: 
www.schneider-electric.com/buildings     Address: 95 S. Jackson St., Ste 300, 
Seattle , WA 98104 , USA

*** Please consider the environment before printing this email.
 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110117/094a2fc7/attachment-0002.htm>


More information about the Equest-users mailing list