[Equest-users] Cooking Equipment and Elevators/ Exhaust fans

Paul Diglio paul.diglio at sbcglobal.net
Mon Jan 24 12:36:13 PST 2011


Crina:

Under Utility & Economics, EM1 you can specify the Interior or Exterior Direct 
Loads.  You can create a sub-meter in that tab then assign a meter to the 
elevators and a meter for the kitchen equipment to separate these loads from 
EM1.


Paul Diglio




________________________________
From: "Bosch, Crina" <CBosch at karpinskieng.com>
To: equest-users at lists.onebuilding.org
Sent: Mon, January 24, 2011 2:03:48 PM
Subject: [Equest-users] Cooking Equipment and Elevators/ Exhaust fans

 
Dear users, 
 
I received form USGBC the following comment: 
 
“The project contains elevators and kitchen equipment in the actual design; 
however, the process energy related to the elevator and kitchen equipment was 
not included in each energy model, since Section 1.8 of the template does not 
include the process energy consumption for elevator or kitchen equipment. Revise 
the Proposed and Baseline models to include the process energy for elevator and 
kitchen equipment in the appropriate space in the models. In addition, update 
the template reflecting the changes.”
 
The kitchen equipment and elevators were input in the model under the equipment 
tab for each space as designed but I couldn’t separate them in eQuest from the 
Misc. Equip under the Consumption by Enduse Report or Demand Report. I verified 
everything I could and see how I can spit them and the only thing I found was 
this: “INTERIOR-EU - Accepts a list of up to 10 code-words specifying the 
end-use category of the INTERIOR-POWER. The code-words correspond to the end-use 
categories in the end-use reports (PS-E, PS-F, BEPS, BEPU). Acceptable entries 
are LIGHTS, TASK-LIGHTS, MISC-EQUIP, SPACE-HEATING, SPACE-COOLING, HEAT-REJECT, 
PUMPS&AUX, VENT-FANS, REFRIG-DISPLAY, HT-PUMP-SUPPLEM, DOMEST-HOT-WTR, and 
EXT-USAGE. “
In the end I understand that eQuest does not have the option of doing what the 
reviewer is asking for. 

 
The reviewer also wants the independent fans to be separated from the supply and 
return fans which I didn’t find how. 


Am I missing something here? 
 
Your help is appreciated. 
Thank you.
Crina Bosch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110124/56cae0ca/attachment-0002.htm>


More information about the Equest-users mailing list