[Equest-users] Unable to assign a VAV "terminal type"

Carol Gardner cmg750 at gmail.com
Mon Jul 4 12:08:20 PDT 2011


I think the Zone Terminal and Fans line that is grayed out is only for PIU
systems, where boxes can be series, parallel and standard VAV. In VAVS, it
appears that they just default to standard VAVS. What kind of changes are
you trying to make?

Carol

On Mon, Jul 4, 2011 at 11:24 AM, Rob S. Young <youngrs at kjww.com> wrote:

> System Type is VAVS.****
>
> ** **
>
> Thanks,****
>
>
> Rob****
>
> ** **
>
> [image: Description: 50th KJWW E-mail.jpg]****
>
> *Rob Young, PE*****
>
> Mechanical Engineer | *youngrs at kjww.com <address at kjww.com>*****
>
> 2882 106th St | Des Moines, IA 50322****
>
> 515.334.9906 | Direct: 515.334.4311 | Fax: 515.334.9908 ****
>
> www.kjww.com****
>
> ** **
>
> *From:* Carol Gardner [mailto:cmg750 at gmail.com]
> *Sent:* Monday, July 04, 2011 11:40 AM
> *To:* Rob S. Young
> *Cc:* equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] Unable to assign a VAV "terminal type"****
>
> ** **
>
> What are you calling your system type? It will have to be VAVS, PVAVS or
> PVVT to be able to include VAV boxes. ****
>
> ** **
>
> Carol****
>
> On Mon, Jul 4, 2011 at 9:12 AM, Rob S. Young <youngrs at kjww.com> wrote:****
>
> I am working on a model for a project where multi-zone air handling systems
> are being converted to single-duct VAV systems.  I have already completed
> the system changes so that all of the air handling units are single-duct
> VAV.  However, I am unable to change the zones to include VAV boxes.  Under
> each zone in the "Air Flow" tab, the "Zone Terminal and Fans" section is all
> grayed out and will not allow any changes.  I tried deleting the zone and
> re-creating it, but I still have the same issue.  Any advice is much
> appreciated!
>
> Rob
>
> This message and any attachments contain information intended for a
> specific party and may include sensitive or confidential material. If you
> are not the intended recipient, please do not read, copy, use, or disclose
> to others.  Please notify the sender of the delivery error by reply and then
> permanently delete this message and all attachments.
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG****
>
>
>
>
> --
> Carol Gardner PE****
>
>
> ------------------------------
> *This message and any attachments contain information intended for a
> specific party and may include sensitive or confidential material. If you
> are not the intended recipient, please do not read, copy, use, or disclose
> to others. Please notify the sender of the delivery error by reply and then
> permanently delete this message and all attachments.*
>   ­­
>



-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110704/4de321c3/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 7768 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110704/4de321c3/attachment-0002.jpeg>


More information about the Equest-users mailing list