[Equest-users] Copeland semi-hermetic compressor curves
Pranav Godbole
pgodbole at VACOMTECH.com
Mon Jul 11 14:11:02 PDT 2011
Jaya,
You can get the model specific data from the Copeland (Emerson) Product
Selection Software, and build the curves. E.g. you can get tabulated
values for the power and capacity at different SSTs and SCTs.
Regards,
Pranav Godbole
From: Carol Gardner [mailto:cmg750 at gmail.com]
Sent: Sunday, July 10, 2011 7:47 PM
To: Jaya Mukhopadhyay
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Copeland semi-hermetic compressor curves
Look in the DOE2.2 Volume 2r manual under compressors. There are some
different rules for the curves for this equipment.
Carol
On Sun, Jul 10, 2011 at 7:15 PM, Jaya Mukhopadhyay
<jaya_mukho at yahoo.com> wrote:
Hello:
I am trying to simulate semi-hermetic discus compressors by Copeland in
eQUEST.
Could anybody help me with the power and capacity curves that I could
use in my model?
Or
Could you point to references that I could use to obtain this
information.
Any help is greatly appreciated.
Thanks
Jaya
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
--
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110711/92a60b9e/attachment-0002.htm>
More information about the Equest-users
mailing list