[Equest-users] Chiller Curves

[Carol Gardner]

Hi Rob,

Have you looked on their website to see if they have any technical
specifications posted? Many manufacturers do, you just have to look around a
bit. Otherwise if you have any information for a similar chiller that you
could use to see how it unloads.

Best,

Carol

On Tue, Jul 19, 2011 at 11:19 AM, Rob Hudson <rdh4176 at gmail.com> wrote:

> I am attempting to construct custom chiller curves, and even though it
> seems simple enough to accomplish I have run into a snag.  The manufacturer
> will only supply me with 4 points and not 6 points, like equest likes.  Any
> suggestions beyond complaining to the manufacturer some more?
>
> thanks,
>
> --
> Rob Hudson
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110719/4ab85f73/attachment-0002.htm>