[Equest-users] Chiller curve

Ruifeng, Grammy Jiang grammy.jiang at gmail.com
Fri Jul 22 04:00:32 PDT 2011


Hi,

In equest, the chiller curve is complex, there are four variables, the
chilled water supply temperature, the condenser water supply temperature,
and rated capacity and rated COP, and some of equations for these variables,
please refer the attachment.

Best Regards,

Grammy, Jiang



On Fri, Jul 22, 2011 at 17:55, m zahid <imzahid1 at hotmail.com> wrote:

>
>
>  ------------------------------
>  ------------------------------
> hi
>
>
> how can i draw chiller curve from curve formula ? please tell me
>
> thanks
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110722/bd5b1f7c/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Chiller Curves SDG Rev2 11-12-2010.doc
Type: application/msword
Size: 51712 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110722/bd5b1f7c/attachment-0002.doc>


More information about the Equest-users mailing list