[Equest-users] closed loop cooling tower on the chilled water loop

Patrick Keeney 38keeney at cardinalmail.cua.edu
Tue Jun 7 10:39:16 PDT 2011


Hello All,

Has anyone had any luck modeling a closed loop cooling tower that is only
attached to the chilled water loop?  I would like to have the chilled water
loop have a closed loop CT that runs in series with the chiller with a
bypass valve when it allows.  On the condenser loop would then be an open
loop CT for heat rejection from the chiller.

This closed loop CT will essentially act as "free cooler" when the wet bulb
is low enough and bypass the chiller, otherwise the chiller will make up the
rest of the cooling when the wet bulb is too high.

Any help would be great.


-- 
Patrick J Keeney
MArch-MSSD Candidate
410-299-5627
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110607/d45a95ed/attachment.htm>


More information about the Equest-users mailing list