[Equest-users] U-values in Detailed Mode

[DongEun Kim]

Hi all,

My architect has given me only the U-values for the walls, not R-values or
anything.

Can I just directly put the U-values in the detailed mode? It is simple but
seem too much of a short cut.

Any advice on this?

Thank you in advance.

DE



> Kim, DongEun(DE) | Research Engineer, LEED AP
> Annex R&D Institute, HIMEC(Hanil Mech. & Elec. Consultants)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110629/b12044d4/attachment.htm>